Editorial desk
Bambu Reviews Editorial
Bambu Reviews Editorial is the publishing identity for Bambu Reviews. It is a desk, not a person: no named author, no biography, no professional certifications.
Articles published under this byline are researched from primary sources — vendor and project documentation, published standards and specifications, research papers, and measurements published by whoever took them — drafted with AI assistance, and edited against those cited sources before publication. Nothing here is based on first-hand testing in a private lab, and any figure that appears is attributed to the source it came from.
Corrections go to editor@bambureviews.com. More detail is on the about page and the editorial disclosure.
Posts (23)
- guides
Cheapest Bambu Lab Printer 2026: Every Model by Price
The A1 mini is Bambu Lab's cheapest printer at $209 in October 2026. See A1, A2L, P1S and P2S prices, cost per liter and what the extra cash buys.
- reviews
Bambu Lab A1 Review 2026: Specs, Quality, Safety
A spec-based Bambu Lab A1 review of build volume, automatic calibration and AMS lite, with material limits and safety checks for used printers.
- guides
Best Filament for Bambu Lab A1: PLA, PETG HF, TPU
Which filaments the Bambu A1 actually supports: PLA and PETG HF on the stock nozzle, TPU from a side spool, CF blends only with hardened steel.
- guides
Bambu Bed Sizes, Build Volumes and Desk Footprints
Build volume, printer dimensions and weight for Bambu's A1 and P1 printers in mm and inches, plus AMS stacking height and the 250 mm slicer ceiling.
- guides
SoftFever Bambu Studio Is Now OrcaSlicer: What Changed
SoftFever Bambu Studio became OrcaSlicer. Compare calibration tools, AMS workflows and Bambu network integration before choosing either slicer.
- guides
Best Bambu Lab Printer for Beginners: A1 Mini vs A1 vs P1S
Compare the A1 Mini, A1 and P1S as a first printer on build volume, price, enclosure and AMS support, and see which suits PLA, PETG or ABS.
- comparisons
Bambu Lab A1 vs P1S: Footprint, Enclosure, Speed and AMS
The P1S measures 389 × 389 × 458 mm and the A1 465 × 410 × 430 mm. See how enclosure, acceleration, AMS options and material support compare.
- guides
Bambu Engineering Plate vs Textured PEI vs Smooth PEI
Textured PEI suits PLA and PETG without glue, Smooth PEI gives a smooth bottom but needs glue for PETG, and the Engineering Plate needs glue every print.
- troubleshooting
Bambu Nozzle Clog: Diagnose and Fix Without Guessing
A symptom-first guide to Bambu nozzle and extruder clogs — figure out where the jam actually is, then fix it without tearing the toolhead apart.
- guides
Bambu Nozzle Sizes and Types: 0.4 mm Is Standard
Every Bambu Lab printer, X1 Carbon and P1S included, ships with a 0.4 mm nozzle. Compare 0.2 to 0.8 mm sizes and stainless vs hardened steel types.
- guides
Bambu Upgrades and Mods Actually Worth Doing
Most Bambu printers don't need mods. These are the few upgrades that genuinely earn their place on a Bambu machine, and the ones that waste your money.
- comparisons
Bambu vs Prusa vs Creality: How to Decide
Three philosophies, not just three brands. An honest decision framework for choosing between Bambu Lab, Prusa and Creality in 2026, and who each one suits.
- guides
Bambu Print Failures: 6 Signatures and Their Real Cause
Six Bambu print failure signatures, from warping and stringing to layer shifts, clogs, and drooping overhangs, plus the real cause behind each one.
- guides
Bambu Lab Maintenance Schedule by Print Hours
A practical Bambu Lab maintenance schedule covering build-plate cleaning, belts, rails, fans, nozzles and PTFE checks by use interval.
- guides
Bambu Studio Flush Volumes: Cut AMS Multicolor Purge Waste
Learn how the AMS changes colors through one nozzle, then tune flush volumes per color pair, flush into infill or supports, and order slots to cut waste.
- guides
Bambu First Layer Problems: Calibration & 4 Fixes
Fix Bambu first-layer adhesion in order: clean the plate, match the surface, check Z offset, then rule out wet or inconsistent filament.
- comparisons
Bambu A1 vs A1 Mini: 256 mm vs 180 mm Bed Size Compared
The A1 bed is 256 × 256 mm with 256 mm of height; the A1 mini's is 180 × 180 × 180 mm. Compare footprint, bed temperature, AMS lite and price.
- comparisons
Bambu Lab P1P vs P1S: Key Differences and the Enclosure Kit
The P1P and P1S share the same CoreXY core. Learn what the P1S enclosure adds, whether a P1P can be enclosed later and which to buy new.
- reviews
Bambu A1 Mini Review: Bed Size, Specs and Material Limits
The A1 mini prints on a 180 × 180 mm bed up to 180 mm tall. The machine is 347 × 315 × 365 mm and 5.5 kg; see full specs and filament limits.
- guides
Bambu AMS Troubleshooting: Error Codes, Jams & Fixes
Diagnose Bambu AMS filament-change and buffer errors, snapped filament, feed jams, PTFE wear, and material problems with a step-by-step fix order.
- guides
Bambu Lab Filament Guide: Settings for 6 Materials
Find nozzle and bed temperatures, wall speeds, cooling, retraction, enclosure needs, and AMS guidance for PLA, PETG, ASA, ABS, PA-CF, and TPU.
- comparisons
Bambu P1S vs X1 Carbon: Which Should You Buy?
Compare a new Bambu P1S with a used or remaining-stock X1 Carbon after its March 2026 discontinuation: Lidar, AI camera, materials and footprint.
- reviews
Bambu Lab X1 Carbon Review: Performance, AMS, and Limits
A spec-based Bambu Lab X1 Carbon reference for owners and used buyers after its March 2026 discontinuation: calibration, AMS, materials and limits.