#guides
-
OrcaSlicer vs Bambu Studio: Which Slicer to Run
OrcaSlicer began as SoftFever's Bambu Studio fork. What each slicer does better, which device features need the plugin, and when switching is worth it.
-
Bambu Nozzle Sizes and Types: 0.4 mm Is Standard
Compare 0.2, 0.4, 0.6, and 0.8 mm nozzles for detail, layer height, flow, and print time, plus brass, hardened steel, tungsten carbide, and stainless.
-
Bambu Upgrades and Mods Actually Worth Doing
Most Bambu printers don't need mods. These are the few upgrades that genuinely earn their place on a Bambu machine, and the ones that waste your money.
-
Bambu Print Failures: 6 Signatures and Their Real Cause
Six Bambu print failure signatures, from warping and stringing to layer shifts, clogs, and drooping overhangs, plus the real cause behind each one.
-
Bambu Lab Maintenance Schedule by Print Hours
A practical Bambu Lab maintenance schedule covering build-plate cleaning, belts, rails, fans, nozzles and PTFE checks by use interval.
-
Bambu AMS Multicolor Setup: 4 Colors, Less Purge Waste
How single-nozzle multicolor works on the Bambu AMS, how to assign slots and dry filament, and three ways to cut purge waste without color bleed.
-
Bambu First Layer Problems: Calibration & 4 Fixes
Fix Bambu first-layer adhesion in order: clean the plate, match the surface, check Z offset, then rule out wet or inconsistent filament.